Philips WP3822/00 Manual do Utilizador descarregar pdf (Página 11)

4 Screw the attachment nut rmly onto the water purier

housing (Fig. 10).



For taps with an aerator (threaded on the outside) (Fig. 11).

1 Remove the attachment nut and the adapter from the water

purier (Fig. 7).

2 Remove the aerator cap from the tap and pass the attachment nut

over the spout. Take out the original adapter and screw the

matching adapter (B-type) onto the tap (Fig. 12).

3 Tighten the adapter further with a coin (Fig. 13).

4 Firmly screw the attachment nut onto the water purier

housing (Fig. 14).



For taps with an aerator (threaded on the inside) (Fig. 15).

1 Remove the attachment nut and the adapter from the water

purier housing (Fig. 7).

2 Remove the aerator cap from the tap. Take out the original adapter

and screw the matching adapter (C-type) onto the tap through the

attachment nut. If water leakage occurs, wind Teon tape round the

screw thread of the adapter before you screw it onto the

tap (Fig. 16).

3 Tighten the adapter further with a coin (Fig. 17).

4 Firmly screw the attachment nut onto the water purier

housing (Fig. 18).



For taps other than A, B or C. (Fig. 19)

1 Remove the attachment nut and the adapter from the water

purier housing (Fig. 7).

2 Take out the original adapter and screw the D-type adapter onto

the water purier housing. (Fig. 20)

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 191 192

Sem comentários

Philips WP3822/00 Manual do Utilizador Página 11