
15EN
2 On the Bluetooth device, switch on
Bluetooth, search for and select Philips PS1
to start connection (see the user manual
of the Bluetooth device on how to enable
Bluetooth).
• When prompted for a password, enter
"0000".
3 Wait until the source indicator turns solid
blue and you hear a beep sound from the
SoundSphere DesignLine speakers.
4 Select and play audio les or music on
your Bluetooth device.
Tip
• During play, if there is an incoming call, music play is
paused. Play resumes when the call ends.
• To exit Bluetooth, select another source.
Tip
• When your switch back to Bluetooth mode, Bluetooth
connection remains active.
Note
• The music streaming may be interrupted by obstacles
between the device and SoundSphere DesignLine
speakers, such as wall, metallic casing that covers the
device, or other devices nearby that operate in the
same frequency.
• If you want to connect your SoundSphere DesignLine
speakers with another Bluetooth enabled device, hold
Bluetooth for 3 seconds and then press to reset
the Bluetooth connection.
• Philips does not guarantee 100% compatibility with all
Bluetooth devices.
Adjust volume
• Press +/- (volume) to increase or decrease
volume.
• To mute sound, press (mute).
» The power indicator on the main
speaker blinks red slowly.
• To restore sound, press (mute)
again or press +/- (volume).
Select a preset sound effect
• During play, press or to select the
music or movie sound effect.
To experience an immersive audio experience
withvirtualsurroundsoundoutput:
• Press SURR ON to turn on the surround
sound effect.
• To turn off the virtual surround sound
effect, press SURR OFF.
Toexperiencetheatsoundeffect:
• Press , , SURR ON and SURR OFF
successively within 3 seconds.
• To turn off the at sound effect, press
either or .
Comentários a estes Manuais