Philips 37PF9631D - annexe 1 Manual de Instruções Página 22

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 60
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 21
Settings
Setup Source
Source
Inf0
This menu allows you to identify the accessory devices you have
connected to the external inputs/outputs.
1. Select Source in the Setup menu.
2. Press the cursor right to enter the list of types of devices
connected to the selected input.
3. Select the accessory device with the cursor up/down.
> When you select AV1, AV2, AV3, HDMI, Side or
Analog In, a list appears allowing you to identify
which type of accessory device is attached to this input.
The TV detects the presence of the connected device
and the signal is routed appropriately,
Once you have selected the source type, e,g. DVD, this
source will automatically be selected when your remote
control is in DVD mode, see p, 7, and when you press
the AV+ button on the remote control.
4. Press the cursor right again to enter the list of types of
devices connected to the selected input.
S. Select the accessory device with the cursor upldown,
Digital Audio
The TV can output Digital audio via the DIGITAL AUDIO
OUT connector to an external amplifier or receiven
If your amplifier or receiver has a matching connector for
Digital Audio In, you can connect it with a single cable to
the TV's DIGITAL AUDIO OUT,
See To make Video and Audio connections, Digital Surround
receive_; p. 45.
Settings
Setup Clock
H,
Clock
i iiliiliiliiliii
Info
This allows you to use yourTV as a clock.
Note;Adjusting the clock is necessary for the Correct w0rking
of Lock after (SeeTV settings, Channels, p. 28) features.
Auto clock mode
I. Select Clock in the Setup menu,
2. Press the cursor right to select the Auto clock mode.
3. Press the cursor right to instruct the TV to get the time
automatically or manually.
Note: Mos_ Of the TV Channels ar e not transmitting dock
information.There are few cable channels but _chey are at the
end of the channel ring.There is no clock transmission in
antenna channels. In such cases either clock extraction is
taldng a long time or there is no clock.
20
Vista de página 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comentários a estes Manuais

Sem comentários