Philips PCA532K Manual do Utilizador

TiVD^Komiri'fnitrticcionf for Ui*UfhmiiitiuysieltixCPHILIPS

To get the best performance from your disk drives and your DVD-ROM drive use one IDE channel for hard disks and the other for your DVD-ROM drive.

If necessary, gently rearrange the cables inside the casing to ensure that the connector reaches your DVD-ROM drive when it is fitted. Don’t worry if

Handling the BoardCaution:Static electricity can damage your equipment. Do not take the board out of its static protective bag until you are ready to

Video ConnectionYour REALmagic Hollywood Plus DVD/MPEG-2 Playback Card must be connected to your VGA card or your PC’s VGA output port in or

Connect your Dolby Digital Surround Soundreceiver to the S/PDIF connector. This signal contains all six Dolby Digital Surround Sound channels.&apos

Note:Due to the copyright protection circuit in use by this product, please do not connect any recording device, such as a VCR, to the Composite Video

Chapter 3.Driver InstallationYour Philips DVD-ROM drive does not need any special drivers for Windows 95 orWindows 98. Windows 95 and Windows 98 have

Chapter 4. Application SoftwareApplication SoftwareThe CD-ROM delivered with the kit contains the application software - DVD Station - a versatile

9. Click Finish to complete the installation of the REALmagic application software. At this stage the setup program automatically launches REALmagic

Chapter 5.Care and Use of Your DVD-ROM DriveCaring for your DVD-ROM drive is mostly common sense. Some points to remember;Do not expose your DVD-ROM d

PCA532 DK01 U55eriXK№iir'~15861385 ISERIAL NUHiEK---LASER SAFETYThis DVD drive employs a laser. Do not remove the cover or attempt to service thi

Adit(ion;il ifvforTTiinion imilitbls jnour ^«Imice:WWW. p<-be.phjij|3SrCtinTS(>4clftci[«ns iub^a [0 without tidciee.At dimEftiiHii. ihown arc a

©1998 Philips Electronics b.v. All Rights Reserved.Septembers, 1998Information in this manual is subject to change without notice. The software descri

FCC Compliance StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FC

ContentsChapter 1:...

Chapter 1. IntroductionCongratulations on your purchase of the Philips DVD/ROM-2 kit.This manual takes you step-by-step through the process of

System RequirementsThe Philips DVD/MPEG-2 kit requires the following:2 megabytes (MB) of free hard disk space 16MB of RAMPentium-based PC (or compatib

Chapter 2.Hardware InstallationBefore you start you will need a small cross-head screwdriver and enough room to remove the case of your computer. The

Locate the hard disk drive in your computer; the flat, 40-core cable connected to it leads either to a plug-in card or directly to a socket on the mot