Philips Exprelia Evo Class Instruções de Operação Página 11

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 52
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 10
7
1
4 5
32
INTENZA WATER FILTER - (OPTIONAL)
To improve the quality of the water you use and extend the life of your machine at the same time, it is recommended that you install the
water  lter. After installation, go to the water  lter initialization programme (see the "MACHINE MENU", page 27). In this way, the machine
informs the user when the water  lter must be replaced.
Remove the water  lter from its packaging, immerse it vertically (with the opening positioned upwards) in cold water and
gently press its sides to let the air bubbles out.
Remove the small white  lter from the
tank and store it in a dry place sheltered
from dust.
Insert the  lter in the empty tank. The
reference mark and the groove must
match. Push  rmly until it is completely
inserted.
Set up the Intenza Aroma System:
A = Soft water
B = Medium water (standard)
C = Hard water
Press the "OK" button. Press the "OK" button to con rm the
introduction of the new water  lter.
Press the "OK" button to con rm. Wait
until the cycle is completed and remove
the container.
Access the "MACHINE MENU" (see
page 27). Select "WATER MENU" and
"ACTIVATE FILTER", then press "OK".
NOTE: At the end of the procedure the display automatically returns to the product dispensing page.
If the Intenza water  lter is not available, insert the small white  lter previously removed (see point 1) into the tank.
Fill the tank with fresh drinking water up
to the "MAX" level and then place it back
into the machine.
Place a large container under the hot
water wand.
WATER MENU
ENABLE FILTER
ACTIVATE FILTER
6
ACTIVATE FILTER?
ESC
OK
7
INSERT FILTER.
FILL THE TANK
OK
8
PLACE A CONTAINER
UNDER THE
WATER SPOUT
OK
9
Vista de página 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Comentários a estes Manuais

Sem comentários