Philips 107P4074 Manual do Utilizador

electronic user's manualfile:///D|/Rita/LF3/lf3manual/english/107P/manual.html [2002/7/7 ?? 11:08:38]

• Recommended display area 12.0" x 9.0" / 306 x 230 mm• Maximum display area 12.8" x 9.6" / 325 x 244 mm SCANNING• Horizontal scan

5) Pess the button. LIGHTFRAME will be activated.6) Press button to go back to MAIN CONTROLS. Press button again to exit the OSD. RETURN TO TOP OF

RETURN TO TOP OF THE PAGE The OSD Controlsfile:///D|/Rita/LF3/lf3manual/english/OSD/osd_cont.htm (27 of 27) [2002/7/7 ?? 11:09:44]

Your International Philips F1rst Choice WarrantyThank you for purchasing this Philips monitor.All Philips monitors are designed and manufactured to hi

Your International GuaranteeDear Customer,Thank you for purchasing this Philips product which has been designed and manufactured to the highestquality

LIMITED WARRANTY(Computer Monitor) One Year Exchange**Product will be exchanged with a new or renewed to original specifications unit within two busin

For more information, contact the Philips Customer Care Center by calling (877) 835-1838 (U.S.A.customers only) or (903) 242-4804.Before Requesting Se

All Philips monitors are designed and manufactured to high standards and deliver high-qualityperformance, ease of use and ease of installation. Should

LIMITED WARRANTY(Computer Monitor) Three Years Free Labor / Three Years Free Service on Parts / One Year Exchange**Product will be exchanged with a ne

Warranty service is available in all countries where the product is officially distributed by Philips ConsumerElectronics. In countries where Philips

This warranty gives you specific legal rights. You may have other rights which vary from state/province tostate/province.Philips Customer Care Center,

For more information on sRGB, please visit: www.srgb.com* These information are subject to change without notice. RETURN TO TOP OF THE PAGEPower Manag

• Dimensions15.7" x 16.1" x 16.5" / 399 x 410 x 419 mm (including base) 15.7" x 14.7" x 16.5" / 399 x 373 x 419 mm (excl

RETURN TO TOP OF THE PAGEViewsFollow the links to see various views of the monitor and its components.Front ViewRear View RETURN TO TOP OF THE PAGE 10

Installing your MonitorFront View • Rear View • 6G3B11 Multimedia Base (option) • PCUH411 USB Hub (option)Front ViewPower button switches your monitor

UP and DOWN buttons are used when adjusting the OSD of your monitorBrightness hotkey. When the RIGHT arrow is pressed, the adjustmentcontrols for BRIG

Power in - attach power cable here.1. Video In - this is a cable which is already attached to your monitor. Connect the otherend of the cable to your

On-Screen DisplayDescription of the On-Screen Display • The OSD Tree • The OSD ControlsDescription of the On Screen DisplayWhat is the On-Screen Displ

RETURN TO TOP OF THE PAGEThe OSD TreeBelow is an overall view of the structure of the On-Screen Display. You can use this as reference when youwant to

On-Screen Displayfile:///D|/Rita/LF3/lf3manual/english/OSD/OSDDESC.HTM (3 of 4) [2002/7/7 ?? 11:08:50]

Safety and Troubleshooting InformationSafety Precautions and Maintenance • Troubleshooting • Regulatory Information • OtherRelated InformationSafety p

RETURN TO TOP OF THE PAGE On-Screen Displayfile:///D|/Rita/LF3/lf3manual/english/OSD/OSDDESC.HTM (4 of 4) [2002/7/7 ?? 11:08:50]

Customer Care & WarrantyPLEASE SELECT YOUR COUNTRY/AREA TO READ THE WARRANTY COVERED:WESTERN EUROPE: Austria • Belgium • Cyprus • Denmark • France

Frequently Asked Questions1. What does the "Designed for Windows" logo signify?The "Designed for Windows" logo means your Phi

pedestal of Philips monitors. Contact your dealer/reseller for details. 6. What models are Mac compatible?All listed Philips monitors are Mac co

Visual Ergonomics:MPRII: No requirement.TCO92: No requirement.TCO95: Set ergonomic rules including minimum contrast level, flicker and jitter.TCO99:

Make sure that all electrical devices (such as mobile phones) are at least 1m from the monitor● Place the monitor in another physical location away

18. Why is LightFrame" important to me? With LightFrame", selected Philips monitors deliver TV quality video and photo display whilemaint

Philips exclusive LightFrame" feature requires the combined operation of hardware that resides in yourmonitor and software installed on your sys

See detailed Multimedia Base specifications on the product information page. 28. Why is a Multimedia Base better than separate speakers? The major a

original values stored in the monitor. By readjusting gain values of the individual cannons, deviation isreduced to zero. Default values are stored du

About This Electronic User's ManualAbout This Guide • Other Documents You May Need • Notational DescriptionsAbout This GuideThis electronic user&

37. Why does my monitor display "Out of Range"?The video card installed in your computer may be too high for the monitor 's specifica

Please be aware that not all models in the Philips range has this manual degauss function. Some modelsare built with an auto degauss feature which aut

This phenomenon can occur with Philips 107P, 109P and 201P monitors and is normal. Your monitor isusing an Aperture Grille, which consists of fine ver

50. Why does the picture disappear after I press the on/off button quickly?This is a unique Philips feature designed to preserve the life of your mo

GlossaryA B C D E F G H I J K L M N O P Q R S T U V W X Y ZAAutoscanA microprocessor-based feature of Philips Brilliance monitors is able to detect au

CCE MarkCE mark is displayed on products per EMC and LV ( low Voltage Device ) directives in compliance withEuropean Community safety, EMI and EMS req

Points where convergence error is specified. Convergence-error correctionA method of correcting for convergence error to insure that all three beams l

controller to be automatically configured to make optimal use of the display without manual user interaction.DDC is implemented as part of the new Plu

Dot rateFrequency in MHz of the dot clock. It is a measure of the speed with which data is transferred between thevideo card and subsequent processin

In 1991, the Swedish Tjänstemannens Central Organization (TCO, Swedish confederation of ProfessionalEmployees ) set a standard even more severe than M

Notes, Cautions, and WarningsThroughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italictype. These bloc

Also called line frequency and expressed in kHz, it is the number of video lines written on the screen everysecond (from left to right). The higher th

LLinearityThe degree to measure the actual location of a pixel on the screen corresponds with its intended location. (see figure ) Line frequencySee

MMoiré effectA fringe pattern arising from the interference between two superimposed line patterns.In a monitor it comes from the interference between

screen area, resulting in an image that is smaller (and less legible) than it needs to be.RETURN TO TOP OF THE PAGE PParallelogram DistortionSee Geome

RRasterThe area on screen that electron beam can reach. Refresh rateSee Vertical scanning frequency. ResolutionThe number of pixels that can be displ

Anti-Static coatingsDue to bombardment by beam electrons, monitor screens become electrically charged when in use.Electrically charged screens surface

The ARAS coating reflects only about 0.5% of the incident light. AGRAS (Anti-Glare anti-Reflection Anti-Static) coating.A combined anti-reflection, an

SOG (Synchronization On Green)A properly functioning color monitor requires five kinds of signals: horizontal sync pulse, vertical sync pulse,red colo

See rotation function. Trapezoid distortionSee Geometrical distortion. TTL signalA TTL (Transistor-transistor-logic) signal is a digital signal level

signaling.A hub consists of two portions: the Hub Controller and Hub Repeater. The repeater is a protocol-controlledswitch between the upstream port a

Product InformationProduct Features • LightFrame™ for Windows • Technical Specifications • PowerManagement • Automatic Power Saving • Physical Specifi

VVertical dot pitchSee Dot pitch. Vertical scanning frequencyExpressed in Hz, this is the number of fields written to the screen every second in inte

resolutions from 1280 x 1024 to 1600 x 1280, horizontal line frequencies up to 90 kHz and bandwidths up to200 MHz. VIS (Viewable Image Size)The real s

Download and PrintThis page provides an option to read the manual in .pdf format. PDF files can be downloaded into your harddisk, then viewed and prin

109B.pdf109S.pdfDownload and Printfile:///D|/Rita/LF3/lf3manual/english/DOWNLOAD/DOWNLOAD.HTM (2 of 2) [2002/7/7 ?? 11:08:52]

items_pagefile:///D|/Rita/LF3/lf3manual/english/107P/items.html [2002/7/7 ?? 11:08:52]

TroubleshootingSafety Precautions and Maintenance • Troubleshooting • Regulatory Information • OtherRelated InformationCommon ProblemsHaving trouble?

The screen says"CONTROL MENU ISLOCKED" when youpress the OK knobPress the OK knob and hold for around 15 seconds to releasethe lock.● Pict

Regulatory InformationTCO '99 Information • TCO Environmental Requirements • CE Declaration of Conformity •Energy Star Declaration • Federal Comm

Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electricand magnetic fields, energy consumption an

electronics components must not contain any cadmium.Mercury**Mercury is sometimes found in batteries, relays and switches. It damages the nervous syst

While English is the default language of LightFrame™, the User Interface can be set up to operate in Dutch,French, German, Italian, Portuguese, Spanis

TCO: Swedish Confederation of Professional Employees) for TCO versions RETURN TO TOP OF THE PAGE Energy Star DeclarationPHILIPS107P4*This monitor is e

This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are

Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière deconformité est susceptible d'interdire à l&apo

RETURN TO TOP OF THE PAGEMIC Notice (South Korea Only)Class B DevicePlease note that this device has been approved for non-business purposes and may

RETURN TO TOP OF THE PAGENorth Europe InformationPlacering/VentilationVARNING:FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄRDU STÄLL

Paikka/IlmankiertoVAROITUS:SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTIIRROTTAA PISTORASIASTA. Plassering/VentilasjonADVARSEL:N

Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklemUntergrund zu verwenden (schlechte Lesbarkeit und erhöhte Auge

have a value of 5A. If a plug without a fuse isused, the fuse at the distribution board shouldnot be greater than 5A.Note: The severed plug must be de

Other Related InformationSafety Precautions and Maintenance • Troubleshooting • Regulatory Information •Information for Users in the U. S. • Informati

6G3B11 Multimedia Base (option)Front View • Rear View • Technical Specifications • Description of the Controls • Installingyour Multimedia Base • Powe

A:No for a LightFrame™ 1 or 2 monitor you need to use LightFrame™ 1 or 2 software. It is howeverpossible to use the LightFrame™ 2 software on a LightF

D. Microphone jackAttach your microphone here.E. Audio InConnect this to the audiooutput of your PC.F. MIC OutConnect this to the microphoneoutput of

2. To UN-INSTALLLift the back hook from the hole on the bottomplate of your monitor.● Slide out the pedestal the opposite direction (fromwhen you in

RETURN TO TOP OF THE PAGE6G3B11 Multimedia Base (option)file:///D|/Rita/LF3/lf3manual/english/INSTALL_2/mm_pede/mm_inst.htm (4 of 4) [2002/7/7 ?? 11:0

PCUH411 USB Hub (Option)Front View • Rear View • Installing your USB HubInstalling your USB HubInstalling on aconventional base.Take out theUSB hub fr

of the MultimediaPedestal.Attach the USBhub by sliding-into the Multimediabase.7. RETURN TO TOP OF THE PAGEUSB Hub (Optional Feature)file:///D|/Rita/

The OSD ControlsDescription of the On-Screen Display • The OSD TreeThe OSD Controls : Brightness (HotKey) • Contrast (HotKey) • Language • Input Signa

1) Press the or button on the monitor. The CONTRAST window appears.2) Press the or button to adjust the contrast.3) When the contrast is adjusted

3) Press the or button until the desired language is highlighted.4) Press the button to confirm your selection and return to MAIN CONTROLS window.

RETURN TO TOP OF THE PAGEINPUT SIGNAL SELECTION (Not available in all models)INPUT SIGNAL SELECTION determines what you see on the screen. The default

MAIN CONTROLS will be highlighted.SmartHelpAfter returning to MAIN CONTROLS . . .. . . to continue to ZOOM, press the button until ZOOM is highlighted

Q:Can I enhance two or more areas at the same time?A:Yes. With LightFrame™ 3 you have the possibility to select several windows with pictures and vid

4) Press the or button to adjust ZOOM.5) Press the button to confirm your selection and return to the MAIN CONTROLS window. CLOSEMAIN CONTROLS will

3) Press the button. The ADJUST HORIZONTAL window appears. POSITION should be highlighted.4) Press the or button to move the image to the left or

6) To adjust the horizontal size, press the or button.7) When the size is adjusted, press the button to return to MAIN CONTROLS window. CLOSE MAINC

3) Press the button. The ADJUST VERTICAL window appears. POSITION should be highlighted.4) Press the or button to move the image up or down.5) Whe

6) To adjust the vertical size, press the or button.7) When the size is adjusted, press the button to return to MAIN CONTROLS window. CLOSE MAINCON

3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should behighlighted.4) Press the button. The SIDE CURVE window appears. PIN

5) To adjust the pincushion, press the or button.6) When the pincushion is adjusted, press the button to highlight BALANCED or press the buttonto

SmartHelpAfter returning to MAIN CONTROLS . . ...to continue to ADJUST SIDE ANGLES, start with step 5 under ADJUST SIDEANGLES and follow the directio

4) Press the button to highlight ADJUST SIDE ANGLES.5) Press the button. The SIDE ANGLES window appears. TRAPEZOID should be highlighted.6) To adjus

8) To adjust the parallelogram, press the or button.9) When the parallelogram is adjusted, press the button to return to the ADJUST SHAPE window.BA

Q: How do I use the LightFrame™ 3 control bar that appears at the top my screen?A: The control bar is another upgrade that helps you run all LightFr

3) Press the button. The ADJUST SHAPE window appears. ADJUST SIDE CURVE should behighlighted.4) Press the arrow until ROTATE IMAGE is highlighted.5)

6) To adjust the rotation, press the or button.7) When the rotation is adjusted, press the button to return to the ADJUST SHAPE window. BACK TOMAIN

3) Press the button. The ADJUST COLOR window appears.4) Press the or button to highlight 9300K for GENERAL USE, 6500K for IMAGE MANAGEMENT,5500K fo

6a) If USER PRESET is highlighted, press the button to highlight RED. Next, press the orbutton to adjust the color red.6b) When finished with RED, p

RESET TO FACTORY SETTINGS returns everything in all the windows to factory presets.1) Press the button on the monitor. The MAIN CONTROLS window appea

SmartHelpAfter returning to MAIN CONTROLS . . .. . . to continue to EXTRA CONTROLS, press the button until EXTRACONTROLS is highlighted. Next, start w

5) To degauss your screen, press the button. Your screen will be degaussed, then the MAINCONTROLS window will reappear. CLOSE MAIN CONTROLS will be h

3) Press the button. The EXTRA CONTROLS window appears. ADJUST MOIRE will be highlighted. 4) Press the button. The ADJUST MOIRE window appears. HO

5) To adjust the horizontal moire, press the or button.6) When the horizontal moire is adjusted, press the button to highlight VERTICAL.7) To adju

on the LIGHTFRAME function to activate in full screen mode.1) Press button on the monitor. The MAIN CONTROLS window appears.2) Press the button unti